Send Message
Tel:
Changzhou Junqi International Trade Co.,Ltd
Changzhou Junqi International Trade Co.,Ltd

To Create Value For Customers. Integrity and Win-Win.

Home ProductsBrushless DC Motor Driver

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output

  • Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output
  • Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output
  • Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output
  • Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output
Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output
Product Details:
Place of Origin: China
Brand Name: JUYI
Certification: CE,
Model Number: JYQD-V6.7
Payment & Shipping Terms:
Minimum Order Quantity: 1 set
Price: Negotiable
Packaging Details: PE bag+ carton
Delivery Time: 5-10 days
Payment Terms: T/T,L/C,Paypal
Supply Ability: 1000sets/day
Contact Now
Detailed Product Description
Product Name: Brushless Dc Motor Driver Board Working Voltage: 24VDC
Working Current: 2A Speed Control: 0-5V
Speed Pulse Signal Output: YES Brushless: For Sensorless Motor
Technical Support: Yes Color: Green

 

24VDC 3A current compact size JYQD-V6.7 BLDC motor driver for sensorless BLDC motor

 

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output 0

 

Model number JYQD-V6.7
Operating temp. -20—85℃
Operating voltage 12V/24V
Max current 3A
Cont.working current 2A
· PWM speed control PWM frequency:1-20KHZ; Duty cycle 0-100%
Analog voltage speed regulation 0-5V
Speed pulse signal output YES

 

Application notes:

 

1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.

2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)

3. JYQD-V6.7 driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 36W, it must add heatsink like the diagram as below.

4. Please take note that JYQD-V6.7 driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.

5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.

6. The “SC” terminal on the JYQD-V6.7 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output 1

Wiring Diagram:

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output 2

 

5V -----Driver board internal output voltage

SC ---- Motor speed pulse signal output port, 5V pulse signal.

1. Control port

Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

GND—Used for Drive board internal control

 

2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND----DC-

VCC----DC +

 

3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.

 

4.Control port distance: 2.54mm,Power port distance:2.54 mm

 

5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output 3

 

Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output 4Arduino Brushless DC Motor Driver 12-24V DC 2A Current Speed Pulse Signal Output 5

 

Contact Details
Changzhou Junqi International Trade Co.,Ltd

Contact Person: Ivanzhu

Tel: 0086-13961407941

Send your inquiry directly to us
Changzhou Junqi International Trade Co.,Ltd
No.299 Changjiang North Rd, Changzhou City, JIangsu, China
Tel:86-1396-1407941
Mobile Site Privacy Policy | China Good Quality Brushless DC Electric Motor Supplier. © 2021 - 2024 bldcelectricmotor.com. All Rights Reserved.