INTEGRATED POWER SUPPLY for DEUTERIUM LAMP+TUNGSTEN LAMP used in UV spectra chromatography , atomic absorption,
DEUTERIUM LAMP+TUNGSTEN LAMP INTEGRATED POWER SUPPLY
OWPS 0216DT series Deuterium lamp power supply was developed by OWO team in 2014,and its perfect
replacement for expensive original models, the product has CE proved and 18 months warranty.
OWO now offer Deuterium lamp power supply that is commonly used in UV spectra chromatography , atomic absorption, UV-Visible spectrophotometer ,other spectroscopic equipments and also can be connect with tungsten lamp.
Compared to the traditional linear power supplies this deuterium lamp switching power supply abolishes cumbersome transformers, it has set filament preheat, high voltage trigger and constant current control are just a number of features the deuterium power supply to ensure the stability of UV spectra. A small compact size, light weight and one of the biggest advantage is applicable to international mains input Voltage in the 85-265V AC, no switching required! The power supply also has control port allowing external control signals (such as CPU or manual) which can easily turn on or off the deuterium lamp.
OWPS 0216DT series deuterium power supply has professional anti-electromagnetic interference design, the electromagnetic interference reach to grade A.
OWPS 0216DT series power supply support deuterium lamp and tungsten lamp use, the voltage offering for the tungsten lamp can be customized to 6V,12V,24V, power range:5W-30W.
1. operating environment:
RH: 40℃(20-90)% RH
Pressure: 86-106 KPa
2. storage environment:
RH: 50℃ 90% RH
Pressure: 86-106 KPa
|OWPS - 0216DT
|Voltage input: AC 85 ~ 265V
|Maximum input current:0.8A
Preheat:DC 2.5V or 10V
Working:0V or 6-7V
Tungsten lamp voltage:
Maximum anode voltage:
Turn off signal:
||Note: please add effective isolation between deuterium lamp and tungsten lamp
Constant flow accuracy: 0.05‰(after starting 1h)
|Minimum trigger voltage:DC 550V
|Withstanding Voltage:AC 1500V / 1min
|Turn off signal: 3 ~ 12V / 10mA
|Dimension:130 * 99 * 40 mm
Figure1 AC input: L,N, PE( PE must be grounded)
Note: Please Make sure all connections must be well connected!!!
The control port has an optocoupler insulated with the power supply as the circuit above. Control Mode: High Level: Turn off, Low Level: Light turn on. High Level voltage range: DC3~12V, Current: Above1mA
Signal Port is a feedback signal of the lamp light on or off, the signal can be sued to CPU.
The Deuterium Lamp Power Supply windely used in Landscape Photometer, HPLC Detector, Capillary Electrophoresis, Flue Gas Analyzer, Medical Equipment, Colorrimeter, Pollution Analyzer, etc.
More products information needing, please feel free contact with us. email: email@example.com